STEP 3

Photo #6

Photo #7 Photo #8

Photo #9

Photo #10 Photo #11

Photo #9,#10 - F, F1, F2, F3 ONLY

A)
1) Mold size cutters A, B, C, D, E,
insert stationary cutter into U shape bearings. (Photos #6, #7 and #8).
2)
Insert stationary cutter with bearing into groove of mounted rotating cutters.

A)
1.1) Mold size cutters F, F1, F2, F3,
insert bottom bearing tape into cutter groove. (Photos #9 and #10).
1.2) Insert stationary cutter (with 4 sides bearings in place) into cutter groove.

B) Tighten socket head cap screw with spacer/lock washer (Photo #11 ). Spacer/lock washer is necessary: to keep screw from hitting bottom of bearing.

<<Previous - Next >>